Sales

  • USM VOOP, Compact The Compact Vessel of Opportunity kit is everything you need to add a Compact Sonar Mount to your vessel without the need to weld onto or drill through your gunnel. The VOOP kit can be configured in endless ways, using various extensions, supports and clamps.
  • Kongsberg EM 712 Multibeam Echosounder The EM 712 multibeam echo sounder is a high to very high-resolution seabed mapping system capable of meeting all relevant survey standards. The minimum acquisition depth is from less than 3 m below its transducers, to a maximum of 3600m dependent upon array size. Across track coverage (swath width) is up to 5.5 times water depth, with a maximum of up to 4400 m, which is almost double the range performance of the EM710.
  • Kongsberg M3 Sonar HF (Rental) The M3 Sonar HF is a high-frequency sonar with imaging and profiling modes. It is an impressive upgrade to the original M3 Sonar, with an all-titanium construction and two-hundred percent higher resolution.
  • This hydrodynamic configuration hosts 2-16 kHz and 500Hz-12 kHz sub-bottom transducers and PVDF receiver array configuration. The system is designed to be towed by a vessel. This type does support an amplifier option.
  • Impact Subsea ISS360 Compact Imaging Sonar Equipment to supply a small and portable Compact Imaging scanning sonar system. Comes with a titanium instrument, 0.5-meter interface whip, USB drive with SeaView configuration software and user manual, quick start guide, and transit case.
  • **Paired system rates with R2Sonic sonars: Equipment rental to an I2INS. Comes with the I2NS SIM box, submersible IMU, 15-meter IMU cable, dual GNSS antennas, dual 10-meter antenna cables, Ethernet cable, dual RS232 F/F serial cables, PPS cable, AC power cable, POS View control software, and transit case.
  • Applied Acoustics 1100 Series Mini Beacons Equipment rental to supply of tracking and positioning 1500-2000m depth rated MF Omni or Directional transponder with 150-200dBar pressure sensor with battery charger including shipping case.
  • USM Compact OTS AL Weld Down Plate Consumable plate that is welded to the vessel to support the Compact OTS Base Assembly. Footprint is 9" x 12" and is available in aluminum, steel, or stainless steel. **Pricing for steel and stainless steel may vary.
  • USM High Tower Mount USM HighTower Over-the-Side (OTS) Mount. Comes with HighTower base assembly with gear drive and shear block, 7-ft x 4.0" Z-foil, storage angle bracket, 3-ft cheater bar and mounting hardware. **Weld down plate purchased separately as this will be permanently installed on the vessel.
  • USM MegaTower OTS Mount USM MegaTower Over-the-Side (OTS) Mount. Comes with MegaTower base assembly and shear block, 12-ft x 4.5" Z-foil, storage angle bracket, 3-ft cheater bar and mounting hardware. **Weld down plate sold separately and is a consumable item as it will be permanently affixed to the vessel.
  • Fugro MarineStar Subscription available with the following options:
    • Fugro MarineStar, Monthly, Coastal
    • Fugro MarineStar, Monthly, Regional
    • Fugro MarineStar, Yearly, Coastal
    • Fugro MarineStar, Yearly, Coastal Inland
    • Fugro MarineStar, Yearly, Regional
    • Fugro MarineStar,Monthly, Coastal Inland
  • Maximize your ROI with Applanix® POS MV OceanMaster. OceanMaster is a user-friendly, turnkey system designed and built to provide accurate attitude, heading, heave, position, and velocity data of your marine vessel and onboard sensors. Applanix POS MV blends GNSS data with angular rate and acceleration data from an IMU and heading from GNSS Azimuth Measurement System (GAMS) to produce a robust and accurate full six degrees of freedom Position and Orientation solution. All Applanix POS MV models are designed for use with multibeam sonar systems, enabling adherence to IHO (International Hydrographic Survey) standards on sonar swath widths of greater than ± 75 degrees under all dynamic conditions.

Title

Go to Top